Inventory
Atlas Copco Model GA 160 Air Compressor
1055 CFM @ 120 PSI, 200 HP, 575 Volt, complete with air dryers and receiver tanks. Excellent condition.
Availability: 2
Brookville Model BCE35UP
35 Ton, 42" gauge, powered by a Deutz Model F10L413FW Diesel engine, planetary drive
Availability: 1
Gia (Atlas Copco) Model DHD
25 Ton, 24"/30" gauge, Clark power-shift transmission, powered by a 220 HP Deutz Model BF6M1013CP diesel engine, CE Certified
Availability: 5
Brookville Model BDC24UP
24 Ton, 36" gauge, powered by a Deutz Model BF6M1013E Diesel engine, planetary drive and wet disc brakes, 194 HP, Clark power-shift transmission
Availability: 4
Schöma Model CFL-150-DCL
23 Ton, 36" gauge, powered by a Deutz F6L413FRW Diesel engine
Availability: 8
Brookville Model BDC20XP
20 Ton, 36" gauge, MSHA Permissible powered by a DST modified CAT 3306 diesel engine
Availability: 3
Howden Model M-96-58D Main Mine Ventilation Fan
2500 HP, 2 Stage, excellent condition
Availability: 1
Novenco Model 2240/1325-20 Main Mine Ventilation Fan
Up to 1000 HP, excellent condition
Availability: 2
Howden Model M-96-50-1180 Main Mine Ventilation Fan
Up to 800 HP
Availability: 1
Metalliance Model VMS-50
Rubber tired segment hauler, 50 ton maximum hauling capacity, units used on one project, excellent condition, powered by a Cat C7 Acert 294 HP Tier III A diesel engine
Availability: 2
Wagner 12-ton capacity dump truck
Completely rebuilt and ready to go, powered by a Deutz Model F6L413W diesel engine
Availability: 1
Eimco Model 12B
Overshot air mucker, 18"/24"/30"/36" gauge
Availability: 4
Mühlhäuser (Lift Off)
25 cubic yard, 36" gauge, tandem bogie design with brakes on one axle per bogie, excellent condition
Availability: 20
Atlas Copco Model ST3.5 Scooptram
3.5 cubic yard capacity, powered by a Deutz F8L413FW diesel engine
Availability: 2
Sullair Model D1300QH
Powered by a Caterpillar 3406 engine
Availability: 1
Gardner Denver Model Flex Air 1200
1200 CFM, powered by Caterpillar 3406 engine
Availability: 2
Ingersoll Rand Model XLE 2100 CFM at 125 PSI
Powered by a 400 HP, 4160 Volt motor, size 24-1/2" x 13-1/2" x 10"
Availability: 1
Ingersoll Rand Model XLE 1600 CFM at 135 PSI
Size 20-1/2" x 11-1/2" x 8-1/2", powered by a 300 HP, 480 Volt motor, skid mounted
Availability: 1
Atlas Copco Model GA 160 Air Compressor
1055 CFM @ 120 PSI, 200 HP, 575 Volt, complete with air dryers and receiver tanks. Excellent condition.
Availability: 2
California Switch
24" gauge California Switch
Availability: 2
Moran Engineering Agitator Car
12 cubic yard capacity, 36"/42" gauge
Availability: 40
Moran Engineering Agitator Car
6 cubic yard capacity, 24"/30"/36"/42" gauge
Availability: 90
Moran Engineering Agitator Car
4 cubic yard capacity, 24" gauge
Availability: 35
Schwing Model 800 Concrete Pump
Skid mounted, powered by a 150 HP, 480 Volt electric motor, 80 cubic yards per hour
Availability: 1
Transcrete (Sidewinder) Concrete Pump Model 45-VS
Skid mounted, powered by a 50 HP, 480 Volt electric motor, 45 cubic yards per hour
Availability: 2
Transcrete (Sidewinder) Concrete Pump Model 45-VS
Skid mounted, powered by Deutz Model F4L912W Diesel engine, 45 cubic yards per hour
Availability: 1
Tamrock Model HLR438 Drill
Availability: 3
Tamrock Model MR600 Boom
Availability: 1
Tamrock Model ZR650 Boom
Availability: 3
Tamrock Model ZR990 Boom
Availability: 3
Atlas Copco Model 1038 Drill
Availability: 4
Atlas Copco Model BUT 15 ERH Boom
Availability: 4
Atlas Copco Model BUT 10 FHH Boom
Availability: 2
Atlas Copco Power Pack
60 HP, 575 Volt
Availability: 6
Atlas Copco Model BMH628 Feed
23'
Availability: 2
Atlas Copco Model ROC 400A-00 Air Track
With a BBE57 drill
Availability: 1
Gardner Denver Mini-Bore Two Boom Drill Jumbo
Rubber tired, air powered, PERMISSIBLE, complete with two 9'6" Rota Booms, two DPT dirll positioners, two 2MSB 10' screw feeds, two PR55 drills
Availability: 2
Gardner Denver Mini-Bore Two Boom Drill Jumbo
Rail-mounted, 24"/30"/36"/42" gauge, complete with two 9'6" Rota Booms, two DPT drill positioners, two 2MSB 10' screw feeds, two PR55 drills
Availability: 2
Gardner Denver Two Boom Crawler Mounted Drill Jumbo
Complete with two 9'6" Rota-Booms, two DPT drill positioners, two 2MSB 10' screw feeds and two PR55 drills
Availability: 1
Gardner Denver Model 5100 Two Boom Drill Jumbo
Crawler mounted, complete with two 11' JTI Rota-Booms, two DPT Drill positioners, two 2MSB 12' screw feeds, two PR55 drills
Availability: 1
Gardner Denver Model 3700 Single Boom Drill Jumbo
Crawler mounted, air powered, complete with one 9'6" JTI Rota-Boom, one DPT drill positioner, one 2MSB 10' screw feed, one PR55 drill
Availability: 1
Gardner Denver Universal III Three Boom Drill Jumbo
Rubber tired, complete with three 11' JTI Rota-Booms, three DPT drill positioners, three 2MSB 12' screw feeds, three PR55 drills, powered by a Deutz Model F6L912W engine
Availability: 2
Gardner Denver Medi-Bore Two Boom Drill Jumbo
Rubber tired, complete with two 11' JTI Rota-Booms, two DPT drill positioners, two 2MSB 12' screw feeds, two PR55 drills, powered by a Deutz Model F6L912W engine
Availability: 1
Gardner Denver Mini-Bore Two Boom Drill Jumbo
Rubber tired, complete with two 11' JTI Rota-Booms, two Drill positioners, two 2MSB 12' screw feeds, two PR55 drills, powered by a Deutz Model F3L912W engine
Availability: 4
Tamrock Minimatic Model HS205 L
S/N 708169, two boom hydraulic drill jumbo, rubber tired, ZR700 booms, HL 538 drills, voltage 380/50 cycle
Availability: 1
Tamrock Paramatic Two Boom Drill Jumbo with basket
Diesel powered, electric/hydraulic, rubber tired, complete with two Model ZRS 1000 Booms, two KS140XH44 Feeds, two HV417 Power Packs, powered by a Deutz Model F6L912W engine
Availability: 1
Atlas Copco PROMEC
Long Hole Drill, electric/hydraulic, rubber tired, complete with one 1038 Drill, drills 360 degrees
Availability: 1
Intermountain Electronics 2500 KVA
Model 7200-PC2500, Power Center, 7200 Primary, 950/480 Secondary, skid mounted
Availability: 1
General Electric 300 KVA
Power Center, 4160 Primary, 480 Volt Secondary, skid mounted
Availability: 4
PEMCO 75 KVA
Model K75, Power Center, 13,800 Primary, 480 Volt Secondary, skid mounted
Availability: 7
Viber Model TV-5
Concrete vibrator
Availability: 150
Viber Model TV-7
Concrete vibrator
Availability: 200
Hagglund Model 9HR Loader
Crawler mounted, air powered
Availability: 1
Hagglund Model HRST140 Shuttle Car
14 cubic meter capacity, 36" gauge, electric power
Availability: 1
Hagglund Model HRST115E Shuttle Car
11.5 cubic meter capacity, 36" gauge, electric power
Availability: 2
Hagglund Model 8HR-5EL Loader
42" gauge, electric power
Availability: 2
Hagglund Model 8HR Loader
36" gauge, air powered
Availability: 1
Mine & Smelter Cone Crusher
Size 10"
Availability: 1
ASEA Traction Motor - Trolley - ASEA Type LJB 23-3
Four pole, 75 HP, 600 Volt
Availability: 14
Goodman Traction Motor - Trolley - Goodman Model 132A
40 HP, 250 Volt
Availability: 2
Goodman Traction Motor - Trolley - Goodman Model 75B
30 HP, 250 Volt
Availability: 10
Goodman Traction Motor - Trolley - Goodman Model 158
40 HP, 250 Volt
Availability: 2
General Electric Traction Motor - Trolley - Model 81A/C
125 HP, 250 Volt
Availability: 10
General Electric Traction Motor - Trolley - Model HM840 T2
75 HP, 250 Volt
Availability: 24
General Electric Traction Motor - Trolley - Model HM829
75 HP, 250 Volt
Availability: 6
General Electric Traction Motor - Trolley - Model HM809
60 HP, 250 Volt
Availability: 6
General Electric Traction Motor - Trolley - Model GHM-845
50 HP, 250 Volt
Availability: 6
General Electric Traction Motor - Trolley - Model 5GHM 839-AB4
45 HP, 250 Volt
Availability: 8
Greensburg Traction Motor - Battery - Greensburg Frame D6000
Type M160/190, 18 HP, 80 Volt
Availability: 84
Greensburg Traction Motor - Trolley - Greensburg Frame OX3609TT
250 Volt
Availability: 2
General Electric Traction Motor - Trolley - Model 5GHM-848 A1
65 HP, 250 Volt
Availability: 16
Atlas 3 Ton Type "K"
24" gauge, battery
Availability: 3
Greensburg 2-1/2 Ton Monitor
24" gauge, battery
Availability: 2
Goodman Mancha B Trammer 1.5 Ton
18" gauge, battery
Availability: 1
Goodman Traction Motor - Battery - Goodman Model 154
50 HP, 128 Volt
Availability: 4
Goodman Traction Motor - Battery - Goodman Model 142EB
28 HP, 96 Volt
Availability: 16
Goodman Traction Motor - Battery - Goodman/Mancha Model M49B
14 HP, 80 Volt
Availability: 10
Goodman Traction Motor - Battery - Goodman/Mancha Model M-9
5.5 HP, 48 Volt
Availability: 10
Goodman Traction Motor - Trolley - Goodman Model 201
With blower, 125 HP, 500 Volt
Availability: 1
Goodman Traction Motor - Trolley - Goodman Model 201
With blower, 125 HP, 250 Volt
Availability: 2
Goodman Traction Motor - Trolley - Goodman Model 81C
120 HP, 250 Volt
Availability: 8
Goodman Traction Motor - Trolley - Goodman Model 136B
75 HP, 250 Volt
Availability: 8
Greensburg Scout 3.5 Ton
18" gauge, battery
Availability: 3
Goodman Mancha 4 Ton
18" gauge, battery
Availability: 1
Greensburg 4 Ton Monitor
24" gauge, battery
Availability: 4
Greensburg 6 Ton Model H1 Type "C"
36" gauge, battery
Availability: 1
Greensburg 6 Ton Cruiser Monitor
36" gauge, battery
Availability: 1
Plymouth 6 Ton Model EB-6
18"/24" gauge, battery
Availability: 1
Greensburg 8 Ton Monitor
36" gauge, battery
Availability: 25
General Electric 8 Ton Model LME2C8-6W
36" gauge, trolley
Availability: 5
Atlas 10 Ton Type D
30" gauge, battery
Availability: 1
ASEA 26 Ton Model LGBT-22
36"/42" gauge, combination battery/trolley
Availability: 6
General Electric 30 Ton Model 5GHM850-B4
42" gauge, trolley, NEW
Availability: 2
Balco 25 Ton Battery Locomotive
36" gauge, two motor drive, 75 HP each
Availability: 2
General Electric 20 Ton Model LME-2C20-C2
36" gauge, trolley
Availability: 16
Goodman 18 Ton Model 136B
36" gauge, combination battery/trolley
Availability: 1
Goodman 15 Ton Model 136B
36" gauge, trolley
Availability: 3
General Electric 15 Ton Model LME2C15-A15
36" gauge, trolley
Availability: 8
Goodman 15 Ton Model 154
36" gauge, battery
Availability: 4
General Electric 13 Ton Model 2C13-A2
36" gauge, trolley
Availability: 4
Balco 12 Ton
36" gauge, battery, 96 Volt
Availability: 2
Greensburg 12 Ton
42" gauge, battery
Availability: 1
Greensburg 12 Ton Monitor
36" gauge, battery
Availability: 1
Greensburg 11 Ton
36" gauge, battery
Availability: 6
Balco 10.5 Ton
36" gauge, battery
Availability: 4
Goodman 10 Ton Model 136B
36" gauge, trolley
Availability: 2
Greensburg 10 Ton Type "C"
42" gauge, battery
Availability: 1
Schöma Model CFL-100-DCL-XP
15 Ton, MSHA Permissible diesel locomotive, 30"/36" gauge, powered by a DST modified Isuzu engine, CE Certified
Availability: 2
MEI Series II
4 Ton, 18"/24" gauge, powered by Deutz Model FL1011 Diesel engine
Availability: 1
Plymouth Model HMD 6 Ton
24"/30"/36" gauge, powered by Deutz Model F4L912W Diesel engine
Availability: 2
Plymouth Model HMD 8 Ton
24"/30"/36" gauge, powered by Deutz Model F6L912W Diesel engine
Availability: 5
Greensburg Model C-10
10 Ton, 36" gauge, powered by Cat D330T Turbocharged Diesel engine
Availability: 2
Clayton 10 Ton
24"/30"/36" gauge, hydrostatic drive, powered by Deutz F6L912W Diesel engine
Availability: 2
Plymouth Model DMD-24
12 Ton, 24"/30"/36" gauge, powered by a Deutz Model F8L714 Diesel engine
Availability: 4
Clayton 12 Ton
24"/30"/36" gauge, hydrostatic drive, powered by a Deutz F6L912W Diesel engine
Availability: 1
Balco 12 Ton
36" gauge, powered by Deutz Model F8L413FW Diesel engine
Availability: 1
Eimco 15 Ton
40"/42"48" gauge, powered by Deutz Model F8L413FW Diesel engine
Availability: 1
Plymouth Model DMD
15 Ton, 36" gauge, powered by Caterpillar Model 3306 Diesel engine
Availability: 2
Brookville Model BDC15UP
15 Ton, 36" gauge, powered by a Deutz Model BF4M1013EC Diesel engine, planetary drive and wet disc brakes, 143 HP
Availability: 7
Brookville Model BDC20XP
20 Ton, 36" gauge, MSHA Permissible powered by a DST modified CAT 3306 diesel engine
Availability: 3
Schöma Model CFL-150-DCL
23 Ton, 36" gauge, powered by a Deutz F6L413FRW Diesel engine
Availability: 8
Schöma Model D-60-32 Powered Man-rider
Hydrostatic drive, 18-man capacity, powered by a Deutz Model F4L912W diesel engine
Availability: 4
Brookville Model BDC24UP
24 Ton, 36" gauge, powered by a Deutz Model BF6M1013E Diesel engine, planetary drive and wet disc brakes, 194 HP, Clark power-shift transmission
Availability: 4
Gia (Atlas Copco) Model DHD
25 Ton, 24"/30" gauge, Clark power-shift transmission, powered by a 220 HP Deutz Model BF6M1013CP diesel engine, CE Certified
Availability: 5
Plymouth Model JMD
25 Ton, 36"/42" gauge, powered by a Deutz F10L413FW Diesel engine
Availability: 12
Plymouth Model MMD-24
35 Ton, 36"/42" gauge, powered by Deutz Model F12L413FW Diesel engine
Availability: 4
Schöma Model CFL-200-DCL
35 Tonne, 36" gauge, powered by a Deutz Model BFM1013CP Diesel engine, CE Certified, Clark power-shift transmission, excellent condition
Availability: 3
Brookville Model BCE35UP
35 Ton, 42" gauge, powered by a Deutz Model F10L413FW Diesel engine, planetary drive
Availability: 1
Howden Model M-96-58D Main Mine Ventilation Fan
2500 HP, 2 Stage, excellent condition
Availability: 1
Novenco Model 2240/1325-20 Main Mine Ventilation Fan
Up to 1000 HP, excellent condition
Availability: 2
Howden Model M-96-50-1180 Main Mine Ventilation Fan
Up to 800 HP
Availability: 1
Joy Model M72-36-1780 Min Mine Ventilation Fan
Units were completely rebuilt and never installed, up to 800 HP
Availability: 2
TLT Babcock Model GAF 26.5/12.5-1 Axial Fan
104" diameter, 700 HP, 880 RPM, 4160 Volt
Availability: 1
Wagner Model UT45
Flat Bed, four-wheel drive, powered by a Deutz Model F6L912W engine
Availability: 1
Metalliance Model VMS-50
Rubber tired segment hauler, 50 ton maximum hauling capacity, units used on one project, excellent condition, powered by a Cat C7 Acert 294 HP Tier III A diesel engine
Availability: 2
Wagner 12-ton capacity dump truck
Completely rebuilt and ready to go, powered by a Deutz Model F6L413W diesel engine
Availability: 1
Darda Model 7 Hydraulic Rock Splitter
Availability: 1
Mitsui Model RS150
30"/36" gauge
Availability: 2
Eimco Model 40H
36" gauge
Availability: 4
Atlas Copco Model LM250
30"/36" gauge
Availability: 6
Eimco Model 26
42" gauge
Availability: 3
Eimco Model 25
42" gauge
Availability: 3
Eimco Model 24
30" gauge
Availability: 4
Eimco Model 22
24"/30"/36" gauge
Availability: 3
Eimco Model 12B
Overshot air mucker, 18"/24"/30"/36" gauge
Availability: 4
Atlas Copco Model LM56
36" gauge
Availability: 1
Eimco Model 630
Crawler mounted
Availability: 12
Atlas Copco Cavo Model 520
Rubber tired
Availability: 1
Ingersoll Rand Model 2MRV50
280 GPM at 440' head, powered by 50 HP, 440 Volt electric motor
Availability: 10
Door-Oliver Duplex Diaphragm Pumps
Type "W", 8", 7-1/2" HP, 440 Volt
Availability: 1
Ingersoll Rand Model 6HMTA-4
1500 GPM at 1840' head, powered by 900 HP, 2300/4160 Volt electric motor, NEW
Availability: 2
Ash Pumps Model D5
8" x 8" x 22-1/4", 900 PSI, powered by 500 HP, 2300 Volt electric motor
Availability: 10
Ash Pumps Model C5-D
6" x 6" x 19-3/8", 600 PSI, powered by 250 HP, 2300/4160 Volt motor
Availability: 3
Ash Pumps Model C5
6" x 6" x 19-3/8", 600 PSI, powered by 250 HP, 2300/4160 Volt electric motor
Availability: 15
Ash Pumps Model CD-6-5
400 PSI, rubber lined, 250 HP, 2300 Volt electric motor
Availability: 7
Hazleton Type VS
12", Vertical Sump Pumps, 2000 GPM at 225' head, powered by 250 HP, 480 Volt electric motor
Availability: 3
Mining Equipment Heavy-Duty Chassis
Tandem bogie design, brakes on one axle per bogie, excellent condition (can be used for large muck cars, heavy-duty flat cars, et.)
Availability: 40
C. S. Card (Lift Off)
2.8 cubic yard capacity, 24" gauge
Availability: 22
C. S. Card Granby
2.2 cubic yard capacity, 18"/24" gauge
Availability: 54
C. S. Card Rocker Dump
1.5 cubic yard capacity, 24" gauge
Availability: 24
C. S. Card Rocker Dump
1.18 cubic yard capacity, 24" gauge
Availability: 6
Moran Engineering/C. S. Card Flat Car
24"/30"/36"/42" gauge
Availability: 98
Mining Equipment Car
24 man capacity, tandem bogie with brakes, 36" gauge. NEW
Availability: 6
Sanford-Day Man Car
24 man capacity, 42" gauge
Availability: 2
C. S. Card Man Car
8 man capacity, 36" gauge
Availability: 2
Moran Engineering Vent Line Car
24"/30"/36" gauge, air over hydraulic, 40' capacity
Availability: 2
Moran Engineering Explosive Car
36" gauge
Availability: 1
Sanford-Day Lowboy
42" gauge
Availability: 2
Moran Engineering Segment Cars
36" gauge
Availability: 8
Moran Engineering Segment Cars
42" gauge
Availability: 8
C. S. Card Man Car
12 man capacity, 24"/30"/36" gauge
Availability: 2
Lakeshore Granby
3.5 cubic yard capacity, 24" gauge
Availability: 16
Sanford-Day Granby
3.5 cubic yard capacity, 30"/24" gauge, air dump
Availability: 3
C. S. Card Granby
3.4 cubic yard capacity, 24" gauge
Availability: 14
C. S. Card Granby
3.3 cubic yard capacity, 24" gauge
Availability: 3
C. S. Card (Lift Off)
3 cubic yard capacity, 24" gauge
Availability: 25
C. S. Card (Lift Off)
2.9 cubic yard capacity, 18"/24" gauge
Availability: 8
Sanford-Day Granby
2.9 cubic yard capacity, 24" gauge
Availability: 9
JCI/Welkom Bottom Dump
2.9 cubic yard capacity, 24" gauge, NEW
Availability: 20
C. S. Card Granby
2.9 cubic yard capacity, 24" gauge
Availability: 6
C. S. Card (Lift Off)
2.9 cubic yard capacity, 24" gauge
Availability: 6
C. S. Card (Lift Off)
4 cubic yard capacity, 24" gauge
Availability: 20
C. S. Card Granby
4.25 cubic yard capacity, 36" gauge
Availability: 29
C. S. Card Granby
5 cubic yard capacity, 36" gauge
Availability: 7
Cottonwood Granby
5 cubic yard capacity, 36" gauge
Availability: 16
Moran Engineering (Lift Off)
5 cubic yard capacity, 24" gauge
Availability: 13
C. S. Card (Lift Off)
5 cubic yard capacity, 24" gauge
Availability: 24
Sanford-Day Granby
4.5 cubic yard capacity, 24" gauge
Availability: 15
C. S. Card (Lift Off)
4.5 cubic yard capacity, 24" gauge
Availability: 35
C. S. Card (Lift Off)
4.25 cubic yard capacity, 24" gauge
Availability: 18
C. S. Card Granby
4.25 cubic yard capacity, 24" gauge
Availability: 14
Moran Engineering Side Dump
24 cubic yard capacity, 42" gauge
Availability: 19
Mühlhäuser (Lift Off)
25 cubic yard, 36" gauge, tandem bogie design with brakes on one axle per bogie, excellent condition
Availability: 20
Moran Engineering (Lift Off)
18 cubic yard capacity, 42" gauge
Availability: 12
Mining Equipment Roll-over
18 cubic yard capacity, tandem bogie, 36" gauge, with roll-over dump
Availability: 20
Mining Equipment (Lift Off)
12 cubic yard capacity, 36" gauge, tandem bogie, excellent condition
Availability: 12
Moran Engineering Side Dump
12 cubic yard capacity, 42" gauge
Availability: 9
Moran Engineering (Lift Off)
10 cubic yard capacity, 24"/36" gauge
Availability: 10
Door-Oliver Side Dump
9 cubic yard capacity, 42" gauge
Availability: 12
C. S. Card (Lift Off)
8 cubic yard capacity, 36" gauge
Availability: 25
Moran Engineering (Lift Off)
8 cubic yard capacity, 24" gauge
Availability: 10
C. S. Card Granby
7.4 cubic yard capacity, 36" gauge
Availability: 3
Sanford-Day Granby
7.4 cubic yard capacity, 36" gauge
Availability: 4
C. S. Card Granby
6.5 cubic yard capacity, 30" gauge
Availability: 12
Moran Engineering Side Dump
6 cubic yard capacity, 36" gauge
Availability: 10
Huwood Irwin Side Dump
5.5 cubic yard capacity, 42" gauge
Availability: 12
C. S. Card Granby
5.5 cubic yard capacity, 36" gauge
Availability: 13
C. S. Card Granby
5 cubic yard capacity, 24" gauge
Availability: 5
Wagner Model SST2.5 Scooptram
2.5 cubic yard capacity, powered by a Detroit Model 471TI "D" Deck engine
Availability: 1
Atlas Copco Model ST3.5 Scooptram
3.5 cubic yard capacity, powered by a Deutz F8L413FW diesel engine
Availability: 2
C. S. Card Model L48
48" Slusher Bucket
Availability: 25
Domeq Model 30MNM31D
30 HP, 3960 lbs. pull at 250 FPM
Availability: 4
Ingersoll Rand Model 30MMM3D
30 HP, 3960 lbs. pull at 250 FPM
Availability: 2
Joy Model B2F311
30 HP, 3960 lbs. pull at 250 FPM
Availability: 6
Ingersoll Rand Model 75NNN41D
75 HP, 9900 lbs. pull at 250 FPM
Availability: 1
Ingersoll Rand Model 50MMM41D
50 HP, 6600 lbs. pull at 250 FPM
Availability: 2
Gardner Denver Model HBD
1100 lbs. pull at 150 FPM
Availability: 1
Ingersoll Rand Model A5NNOH
1100 lbs. pull at 150 FPM
Availability: 2
Ingersoll Rand Model K5MM2D
1975 lbs. pull at 250 FPM
Availability: 1
Joy Model S211
1100 lbs. pull at 150 FPM
Availability: 2
Joy Model RF211
100 HP, 13200 lbs. pull at 250 FPM
Availability: 2
Joy Model C2F211
75 HP, 9900 lbs. pull at 250 FPM
Availability: 10
Ingersoll Rand Model 75MM41D
75 HP, 9900 lbs. pull at 250 FPM
Availability: 3
Ingersoll Rand Model 50ML41D
50 HP, 6600 lbs. pull at 250 FPM
Availability: 5
Joy Model B2F211
40 HP, 4400 lbs. pull at 250 FPM
Availability: 8
Joy Model B2F211
30 HP, 3960 lbs. pull at 250 FPM
Availability: 6
Joy Model A2F211
25 HP, 3300 lbs. pull at 250 FPM
Availability: 6
Ingersoll Rand Model 15HM2D
1980 lbs. pull at 250 FPM
Availability: 2
Ingersoll Rand Model 20NM2D
2640 lbs. pull at 250 FPM
Availability: 1
Ingersoll Rand Model 20ML2D
2640 lbs. pull at 250 FPM
Availability: 1
Ingersoll Rand Model 25NM3C
2750 lbs. pull at 300 FPM
Availability: 2
Ingersoll Rand Model 20NM2C
2200 lbs. pull at 300 FPM
Availability: 2
Ingersoll Rand Model 15ML2C
1650 lbs. pull at 300 FPM
Availability: 1
Ingersoll Rand Model 15NM2C
1650 lbs. pull at 300 FPM
Availability: 4
Joy Model FF211
2200 lbs. pull at 165 FPM
Availability: 1
Joy Model JCP-120
23,000 lbs. pull at 30 FPM
Availability: 1
Ingersoll Rand Model 25UWB
14,000 lbs. pull at 40 FPM
Availability: 2
Ingersoll Rand Model 35UWB
12,500 lbs. pull at 96 FPM
Availability: 1
Joy Model JAJ-100
10,200 lbs. pull at 50 FPM
Availability: 1
Ingersoll Rand Model K6U
10,000 lbs. pull at 60 FPM
Availability: 1
Joy Model JHAL-20
2,000 lbs. pull at 110 FPM
Availability: 1
Ingersoll Rand Model HU
2,000 lbs. pull at 124 FPM
Availability: 6
Ingersoll Rand Model EU
2,000 lbs. pull at 54 FPM
Availability: 3
Ingersoll Rand Model D6UL
1,000 lbs. pull at 75 FPM
Availability: 2
Gardner Denver Model HKL
2,000 lbs. pull at 130 FPM
Availability: 2
Seibu
15 KW, 460-380V, 60-50 Hz, 2500 kg pull at 31 MPM
Availability: 2
Jarva Mark 12 Hard Rock TBM
14' diameter, 600 HP, 15" cutters, 460 Volt/60 Cycle.
Availability: 1
2008 Thyssen-Krupp (Herrenknecht) S-234 TBM Bearing
Triple row main bearing, 66.929 inches(1700mm) standard ID. NEW. Was spare on Arrowhead project.
Availability: 1
2008 Thyssen-Krupp (Herrenknecht) Segment Erector Bearing
105 inches (2678mm) standard ID. NEW. Was spare on Arrowhead project.
Availability: 1
DOUBLE DRUM 60"
CIR S/N 1701B, one drum clutched, 1" rope, line speed 1040 FPM, rope pull 14,000 lbs. Electrics, 300 HP, 720 RPM, 2300 Volt AC motor.
Availability: 1
DOUBLE DRUM 60"
CIR S/N 1736B, 60" x 48", both drums clutched, 1" rope, line speed 1020 FPM, rope pull 14,000 lbs. Electrics, 250 HP, 580 RPM, 550 Volt AC motor.
Availability: 1
DOUBLE DRUM 120"
Nordberg S/N 14043, 120" x 78", both drums clutched, 1-1/2" rope, line speed 2100 FPM, rope pull 45,000 lbs. Electrics 1750 HP, 720 RPM, 4160 Volt AC motor.
Availability: 1
DOUBLE DRUM 120"
Nordberg S/N 2030-0803, 120" x 72", both drums clutched, 1-1/4" rope, line speed 800 FPM, rope pull 26,380 lbs. Electrics, 2 x 200 HP, 440 RPM, 440 Volt AC motors.
Availability: 1
DOUBLE DRUM 108"
Nordberg S/N 7030-1110, 108" x 66", both drums clutched, 1-1/2" rope, line speed 1260 FPM, rope pull 35,438 lbs. Electrics, 900 HP, 500 RPM, 500 Volt DC Motor complete with MG Set 900 HP, 2300/4000 Volt synchronous motor and 720 KW, 500 Volt DC generator.
Availability: 1
DOUBLE DRUM 108"
Nordberg S/N 7030-1278, 108" x 45", both drums clutched, 1-1/2" rope, line speed 1015 FPM, rope pull 38,000 lbs. Electrics, 500 HP, 650 RPM, 500 Volt DC Motor.
Availability: 1
DOUBLE DRUM 100"
CIR S/N 1841B, 100" x 60", both drums clutched, 1-1/4" rope, line speed 1300 FPM, rope pull 30,000 lbs. Electrics, 2 x 600 HP, 600 RPM, 2200 Volt AC Motors.
Availability: 1
DOUBLE DRUM 100"
CIR S/N 1836B, 100" x 60", both drums clutched, 1-1/4" rope, line speed 1300 FPM, rope pull 30,000 lbs. Electrics, 2 x 600 HP, 600 RPM, 2200 Volt AC Motors.
Availability: 1
DOUBLE DRUM 100"
CIR S/N 1779B, 100" x 54", both drums clutched, 1-1/8" rope, line speed 1450 FPM, rope pull 24,000 lbs. Previous electrics 2 x 450 HP, 500 RPM, 2300 Volt AC Motors.
Availability: 1
DOUBLE DRUM 96"
Nordberg S/N 2030-0798, 96" x 80", one drum clutched, 1-1/2" diameter rope, line speed 1015 FPM, rope pull 37,000 lbs. Electrics, 800 HP, 590 RPM, 2300/4000 Volt AC Motor.
Availability: 1
DOUBLE DRUM 96"
Nordberg S/N 13917, one drum clutched, 1-1/8" diameter rope, line speed 1240 FPM, rope pull 25,000 lbs. Electrics, 2 x 500 HP, 590 RPM, 2300 Volt AC Motors.
Availability: 1
DOUBLE DRUM 96"
FHB S/N 29333, 96" x 48", one drum clutched, 1-1/8" rope, line speed 1040 FPM, rope pull 18,300 lbs. Electrics, 385 HP, 400 RPM, 2200 Volt AC motor.
Availability: 1
DOUBLE DRUM 84"
Coeur d'Alene S/N 69-90154, 84" x 63", both drums clutched, 1-1/2" rope, line speed 1200 FPM, rope pull 24,000 lbs. Electrics, 700 HP, 705 RPM, 4000 Volt motor.
Availability: 1
DOUBLE DRUM 84"
Vulcan Denver S/N 1353, 84" x 66", both drums clutched, 1-1/8" diameter rope, line speed 1000 FPM, rope pull 18,000 lbs. Previous electrics 2 x 350 HP AC motors
Availability: 1
DOUBLE DRUM 84"
Nordberg S/N 2030-0499, 84" x 52", one drum clutched, 1-1/4" rope, line speed 1250 FPM, rope pull 18,500 lbs. Electrics, 500 HP, 585 RPM, 4160 Volt AC motor.
Availability: 1
DOUBLE DRUM 72"
CIR S/N 1621B, both drums clutched, 1" rope, line speed 1400 FPM, rope pull 21,000 lbs. Electrics, 500 HP, 705 RPM, 2200 Volt AC motor.
Availability: 1
DOUBLE DRUM 72"
CIR S/N 1529B, one drum clutched, 1" rope, line speed 1000 FPM, rope pull 15,000 lbs. Electrics, 400 HP, 500 RPM, 2200 Volt AC motor.
Availability: 1
DOUBLE DRUM 62"
Coeur d'Alene S/N 1959-8, 62" x 52-1/2", both drums clutched, 1-1/2" rope, line speed 800 FPM, rope pull 25,000 lbs. Electrics, 400 HP, 443 RPM, 440 Volt AC motor.
Availability: 1
DOUBLE DRUM 60"
CIR S/N 1802B, 60" x36", One drum clutched, 1" rope, rope pull 14,000 lbs. Electrics, 100 HP, 430 RPM, 440 Volt AC motor.
Availability: 1
DOUBLE DRUM 60"
CIR S/N 1760B, 60" x 36", both drums clutched, 1" rope, line speed 815 FPM, rope pull 14,000 lbs. Electrics, 2 x 250 HP, 580 RPM, 2200 Volt AC motor.
Availability: 1
Canadian General Electric 6 rope Koepe hoist
170" diameter, 2-1/8" diameter ropes, line speed 2920 FPM, designed out of balance 105000 lbs, total suspended load 578000 lbs, 16 Axidisc spring applied _ air release disc brakes, powered by a GE direct coupled overbearing motor, 9500 HP, 65.6 RPM DC motor, power conversion by 12 pulse thyristor converter.
Availability: 1
Canadian General Electric 6 rope Koepe hoist
120" diameter, 1.25" diameter ropes, line speed 1500 FPM, designed out of balance 32000 lbs, total suspended load 257000 lbs, 8 Axidisc spring applied _ air release disc brakes, powered by a GE direct coupled overbearing motor, 1500 HP, 47.7 RPM DC motor, power conversion by thyristor converter.
Availability: 1
ASEA 4 rope Koepe hoist
84" diameter, 13/16" diameter ropes, line speed 2000 FPM, shaft depth 2700 ft., designed out of balance 7.5 tons, maximum load 82,000 lbs., disc brakes, powered by ASEA LA605 direct coupled overbearing motor, 600 HP, 91 RPM, 440 Volt DC motor, MG Set ASEA 700 HP, 1200 RPM synchronous motor, complete with electric control with A10 programmer and ASEA winder regulator and log-on trip recorder.
Availability: 1
Headframe
75' high, column centers 9' x 8', previously used with a 30,000 lbs rope pull utility hoist with 3/4" diameter rope and 6,800 lbs rope pull emergency hoist with _" diameter rope.
Availability: 1
Headframe
80' high, column centres 10' x 10', previously used with a 24,000 lbs rope pull hoist with 1" diameter rope.
Availability: 1
Headframe
50' high, column centres 7-1/2' x 7', previously used with a 10,000 lbs rope pull utility hoist with 3/4" diameter rope.
Availability: 1
Headframe
40' high, column centres 6' x 6', previously used with a 6,800 lbs rope pull emergency hoist with 3/4" diameter rope.
Availability: 1
120" Sheave Wheel
120" diameter.
Availability: 2
60" Sheave Wheel
60" diameter, spoke type.
Availability: 1
28" Sheave Wheel
28" diameter, fabricated.
Availability: 1
36" Sheave Wheel
36" diameter, fabricated.
Availability: 1
42" Sheave Wheel
42" diameter for 1-1/2" rope, manufactured by Timberland, fabricated.
Availability: 4
46" Sheave Wheel
46" diameter for 1-1/8" rope, manufactured by Dorr-Oliver-Long, spoke type.
Availability: 1
48" Sheave Wheel
48" diameter for 1-3/8" rope, manufactured by Timberland, fabricated.
Availability: 11
48" Sheave Wheel
48" diameter, manufactured by Dorr-Oliver-Long, spoke type.
Availability: 2
54" Sheave Wheel
54" diameter, cast.
Availability: 2
58" Sheave Wheel
58" diameter for 1-1/2" rope, fabricated.
Availability: 3
144" Sheave Wheel
144" diameter, spoke type.
Availability: 1
60" Sheave Wheel
60" diameter for 1-3/8" rope, fabricated.
Availability: 1
62" Sheave Wheel
62" diameter, manufactured by Wabi Iron Works, spoke type.
Availability: 2
96" Sheave Wheel
96" diameter for 1-1/4" rope, liners, spoke type, able to split in half.
Availability: 2
96" Sheave Wheel
96" diameter for 1" rope, spoke type.
Availability: 1
120" Sheave Wheel
120" diameter.
Availability: 1
120" Sheave Wheel
120" diameter, spoke type.
Availability: 4
120" Sheave Wheel
120" diameter for 1-1/8" rope.
Availability: 2
144" Sheave Wheel
144" diameter, manufactured by C.S. Card.
Availability: 4
Hepburn S/N 20278
109” x 72”, 1-1/4” rope, two drum disc brakes, gear reducer, line speed 1000 FPM, rope pull 34,000 lbs. Powered by a 1200 HP, 712 RPM, 6900 V AC motor.
Availability: 1
SINGLE DRUM 166" - Nordberg S/N 7030-1098
166" x 69", 1-5/8" rope, line speed 1370 FPM, rope pull 56,500 lbs., powered by 2 x 900 HP, 400 RPM, 500 Volt DC motors.
Availability: 1
SINGLE DRUM 144" - Nordberg S/N 31988
144" x 106", 1-7/8" rope, one post brake, line speed 1250 FPM, rope pull 31,000 lbs., powered by 900 HP, 450 RPM, 600 Volt DC motor, MG Set 800 HP, 2300 Volts Synchronous Motor and 750 KW Generator.
Availability: 1
SINGLE DRUM 120" - Allis Chalmers S/N 1-0730-54350
120" x 60", 1-1/8" rope, one post brake, one pinion drum brake, line speed 712 FPM, rope pull 26,000 lbs., powered by 600 HP, 300 RPM, 250 Volt DC motor, MG Set 725 HP, 2300 Volts synchronous motor.
Availability: 1
SINGLE DRUM 120" - ASEA S/N 308
120" x 72", 1-3/8" rope, disc brakes, ASEA double reduction gear box, line speed 1200 FPM, rope pull 24,000 lbs., powered by a 480 HP, 800 RPM, 440 Volt DC motor, MG Set 500 HP, 50 Hz, 3300 Volt synchronous motor, 390 KW, 4440 Volt DC generator
Availability: 1
SINGLE DRUM 84" - Coeur d'Alene S/N 69-90155
84" x 60", 1-1/2" rope, two post brakes, gear reducer and helical gear set, line speed 800 FPM, rope pull 17,000 lbs. Powered by a 500 HP, 700 RPM, 4000 Volts AC motor.
Availability: 1
SINGLE DRUM 84" - Coeur d'Alene S/N 70-90887
84" x 36", 1-1/2" rope, two post brakes, Westinghouse gear reducer and helical gear set, line speed 400 FPM, rope pull 17,500 lbs., powered by a 250 HP, 705 RPM, 4000 Volt AC motor complete with controls.
Availability: 1
SINGLE DRUM 83" - Coeur d'Alene S/N S44C002
83" x 79-1/2", 2" rope, one post brake, one pinion drum brake, Western gear reducer and gear set, line speed 285 FPM, rope pull 44,000 lbs., powered by 2 x 300 HP, 1150 RPM, 300 HP DC motors, complete with controls, thyristor converter.
Availability: 1
SINGLE DRUM 78" - Nordberg S/N 7030-1094
78" x 66", 1-1/2" rope, one post brake, one pinion drum brake, double reduction gearing, line speed 450 FPM, rope pull 40,000 lbs., powered by a 250 HP, 884 RPM, 4160 Volt AC motor.
Availability: 1
SINGLE DRUM 45" - CIR S/N 1672B
45” x 30”, ¾” rope, one post brake, one pinion drum brake, line speed 300 FPM, rope pull 8000 lbs. Powered by a 150 HP AC motor.
Availability: 1
Timberland Model SSK740-1-50E
Rope pull 74,000 lbs., 16.8 / 24.5 FPM, drum capacity 5,418 feet of 1-3/4” rope, powered by a 50 HP motor.
Availability: 3
Timberland SSK360-1-50EVFD
Rope pull 35,000 lbs., line speed 39 / 51 FPM, drum capacity 1,731 feet of 1-1/4” rope, powered by a 50 HP motor.
Availability: 1
Timberland Model SSK300-1-20E
Rope pull 30,000 lbs., line speed 19 / 43 FPM, drum capacity 4,250 feet of 7/8" rope, powered by a 20 HP motor.
Availability: 2
New Era Model B77-606-2
Rope pull 6,000 lbs., line speed 105 FPM, drum capacity 4,000 feet of 5/8" rope, powered by a 30 HP motor.
Availability: 1
Timberland Model SSK110-1-10E
Rope pull 12,000 lbs., 24 / 42 FPM, drum capacity 1,015 feet of 3/4" rope, powered by a 10 HP motor.
Availability: 2
New Era Model F601
Rope pull 20,000 lbs., line speed 7 / 11 FPM, drum capacity 3,900 feet of 7/8" rope, powered by at 10 HP motor.
Availability: 4
New Era Model F-77-601
Rope pull 20,000 lbs., line speed 27.9 / 41.8 FPM, drum capacity 12,000 feet of 1-3/8" rope, powered by a 25 HP motor.
Availability: 2
New Era Model F810
Rope pull 20,000 lbs., line speed 15.3 / 22.8 FPM, drum capacity 3,400 feet of _" rope, powered by a 15 HP motor.
Availability: 2
New Era Model F501
Rope pull 20,000 lbs., line speed 14 / 21.3 FPM, drum capacity 4,950 feet of 1" rope, powered by a 20 HP motor.
Availability: 2
Timberland SSK220-1-15E
Rope pull 24,000 lbs., line speed 18 / 26 FPM, drum capacity 648 feet of 1" rope, powered by a 15 HP motor.
Availability: 2
New Era Model F505
Rope pull 24,000 lbs., line speed 13.6 / 14.9 FPM, drum capacity 1,600 feet of 1-1/8" rope, powered by a 15 HP motor.
Availability: 2
New Era Model NE810
Rope pull 24,000 lbs., line speed 18.6 / 20.8 FPM, drum capacity 3,200 feet of 1-1/8" rope, powered by a 20 HP motor.
Availability: 4
Lantec Model 540
Rope pull 27,000 lbs, line speed 56 / 107 FPM, drum capacity 2,700 feet of 3/4" rope, powered by a 30 HP motor over hydraulic.
Availability: 1
Timberland Model SSK300-1-25E
Rope pull 30,000 lbs., line speed 20.5 / 31.9 FPM, drum capacity 2007 feet of 1" rope, powered by a 25 HP motor.
Availability: 1
New Era Model F910
Rope pull 33,000 lbs., line speed 15.6 / 17.5 FPM, drum capacity 3,300 feet of 1-1/8" rope, powered by a 20 HP motor.
Availability: 1
Timberland SSK360-1-20E
Rope pull 36,000 lbs, line speed 16.1 / 21.2 FPM, drum capacity 1,730 feet of 1-1/4" rope, powered by a 20 HP motor.
Availability: 6
New Era Model F503
Rope pull 40,000 lbs., line speed 8.1 / 11.3 FPM, drum capacity 4,057 feet of 1-1/8" rope, powered by a 20 HP motor.
Availability: 3
New Era Model F8008
Rope pull 40,000 lbs., line speed 25.4 / 30.6 FPM, drum capacity 5,330 feet of 1-1/8" rope, powered by a 40 HP motor.
Availability: 2
New Era Model F602
Rope pull 45,000 lbs., line speed 18.8 / 22 FPM, drum capacity 7,200 feet of 1-1/32" rope, powered by a 40 HP motor.
Availability: 4
New Era Model F804
Rope pull 50,000 lbs, line speed 8 / 16 FPM, drum capacity 5,000 feet of 1-1/8" rope, powered by a 30 HP motor.
Availability: 2
New Era Model F8101
Rope pull 50,000 lbs., line speed 7 / 14.1 FPM, drum capacity 5,000 feet of 1-1/8" rope, powered by a 15 HP motor.
Availability: 3
Timberland Model SSK1300-1-100EVFD,
Rope pull 131,000 lbs, 20 / 24 FPM, drum capacity 6,156 feet of 2-1/4" rope, powered by a 100 HP motor and VFD.
Availability: 4
New Era Model F803
Rope pull 50,000 lbs., line speed 30 / 37.5 FPM, drum capacity 10,800 feet of 1-1/8" rope, powered by a 50 HP motor.
Availability: 4
New Era Model F2003-GA-85
Rope pull 85,000 lbs, 10 FPM, drum capacity 4,500 feet of 1-5/8" rope, disc brake, powered by a 40 HP motor and VFD.
Availability: 3
Hepburn Model HEI-04-1303
Rope pull 100,000 lbs, 20 FPM, drum capacity 11,000 feet of 1-3/4" rope, disc brake, powered by a 75 HP motor and VFD.
Availability: 4
Timberland Model SSK1000-1-75EVFD
Rope pull 100,000 lbs, 20 / 28 FPM, drum capacity 9,651 feet of 1-7/8" rope, powered by a 75 HP motor and VFD.
Availability: 4
Timberland Model PH65-1-60EH
Electric / hydraulic, rope pull 6,500 lbs., line speed 200 FPM, drum capacity 1,390 ft of 3/4” rope (4 layers), powered by a 60 HP motor.
Availability: 1
Timberland Model MRH35-1-40EH
Electric / hydraulic, rope pull 3,360 lbs., line speed 175 FPM, drum capacity 1,414 ft of 5/8” rope (3 layers), powered by a 40 HP motor.
Availability: 1
Timberland Model PH80-1-150EH
Electric / hydraulic, rope pull 8,400 lbs, line speed 420 FPM, drum capacity 2,386 ft of 3/4” rope (4 layers), powered by a 150 HP motor.
Availability: 2
Timberland Model GP90-1-300EVFD
Electric, rope pull 9,000 lbs, line speed 850 FPM, drum capacity 2,531 ft of 7/8” rope (4 layers), powered by a 300 HP AC motor and VFD.
Availability: 1
Timberland Model MCH300-1-2x250EH
Electric/hydraulic, rope pull 27,000 lbs., line speed 375 FPM, drum capacity 1,800 ft of 1-3/8" diameter rope (3 layers), or 3,800 ft of 27mm diameter rope (4 layers), powered by 2 x 250 HP motors.
Availability: 1
Timberland Model MCH340-1-2x250EH
Electric / hydraulic, rope pull 24,000 lbs., line speed 300 FPM, drum capacity 4,800 ft of 1” diameter rope (4 layers), powered by 2 x 250 HP motors and 1 x 60 HP motor.
Availability: 1
Timberland Model MCH450-1-200EH
Electric / hydraulic, rope pull 24,000 lbs., line speed 200 FPM, drum capacity 2,500 ft of 1" rope (4 layers), powered by a 200 HP motor.
Availability: 1
Timberland Model MCH450-1-2x250EH
Electric / hydraulic, rope pull 20,000 lbs., line speed 300 FPM, drum capacity 3,400 ft of 7/8” rope (4 layers), powered by 2 x 250 HP motors.
Availability: 1
Timberlannd Model MCH140-1-2x250EH
Timberland Model MCH140-1-2x250EH, electric / hydraulic, rope pull 14,000 lbs, line speed 450 FPM, drum capacity 6,050 ft of 7/8” rope (4 layers), powered by 2 x 250HP motors.
Availability: 1
Timberland Model PH80-1-150EH
Electric / hydraulic, rope pull 8,400 lbs, line speed 420 FPM, drum capacity 2,386 ft of 3/4" rope (4 layers), powered by a 200 HP motor.
Availability: 1
Timberland Model PH80-1-215DH
Diesel/hydraulic, rope pull 8,000 lbs., line speed 345FPM, drum capacity 1,680ft of 3/4" rope (4 layers), powered by a 200 HP motor.
Availability: 1
Timberland Model PH65-1-60EH
Electric / hydraulic, rope pull 6,500 lbs., line speed 200 FPM, drum capacity 1,630ft of 3/4" rope (4 layers), powered by a 60 HP motor.
Availability: 2